# Journeyman Exam Mistake Log: Sort Every Miss by Cause

Short answer: After every practice test, write down each miss and give it one cause: wrong article, wrong table column, skipped step, rounding, misread question or out of time\. Count the causes and fix the biggest one first, because one cause usually costs more points than any single topic\. A miss you only mark wrong and never sort will come back on the real exam\.

A mistake log needs a steady supply of scored misses\. The Practice Pack gives you 10 full timed two\-part mocks with a score by part and by topic, a wrong\-answer list and a weak\-area check, and unlimited retakes\. Its 299 step\-by\-step calculation solutions show the exact step where your work split from the right answer, so you can name the cause\. US$39, one payment\.

Get the exam Practice Pack

Tsai Electro is an independent learning site\. Not affiliated with TDLR, PSI or NFPA\. Exam rules can change, so confirm in the PSI bulletin linked below\.

## The six causes and how to spot them

Cause

What it looks like

First fix

Wrong article

You answered from a rule that does not cover the question

Drill the lookup path, for example Article 210 to 210\.19

Wrong table column

Right table, wrong temperature column or wrong row

Say the column out loud before you read the value

Skipped step

You left out a percentage, a factor or a second condition

Write the steps as a list before you calculate

Rounding

Rounded too early, or rounded the wrong way

Round only at the step the method says

Misread question

Missed “copper unless noted”, a named method or the unit asked for

Reread the last line of the question before you answer

Out of time

Guessed because the clock ran down

Practice skip\-and\-return on a timed mock

Our workbook lists traps that fit straight into these causes:

- Wrong table column: derating from the 75 C column instead of the 90 C column in Table 310\.16\.
- Skipped step: forgetting 125% on lighting, show window and sign loads that run all day\.
- Wrong article or method: sizing motor conductors from nameplate current when 430\.6\(A\)\(1\) sends you to the table full\-load current\.
- Misread question: taking the 75% demand with only three fastened\-in\-place appliances; 120\.53 needs four or more\.

## How to keep the log

1. Take the test on the clock\. Untimed practice hides your “out of time” cause\.
2. Mark guesses as you go on your practice sheet, so a lucky guess still counts as a weak spot\.
3. Check every miss against the code path\. Find the article, section or table that answers it, then pick the one cause that fits best\.
4. Count the causes with the calculator below\.
5. Fix the top cause first, then retest\. A cause that stays the same needs a different drill\.

Keep one line per miss: test name, question number, part, cause, and the correct code path\. That last column turns the log into a lookup drill\.

### Free template: mistake log you can copy

Copy this log into a notes app, a spreadsheet or onto paper\. Use one line per miss, then count each cause at the bottom after every practice test\.

JOURNEYMAN EXAM MISTAKE LOG Practice test name: Date taken: Timed? yes / no Score, NEC Knowledge part: Score, Calculations part: ONE LINE PER MISS Q\# \| Part \(NEC Knowledge / Calculations\) \| Guess? yes / no \| Cause \| Correct code path \(article, section or table\) \| Fixed on retest? yes / no \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \(add a line for each miss\) CAUSE COUNT NEC Knowledge Calculations Wrong article Wrong table column Skipped step Rounding Misread question Out of time Top cause this test: Drill I will do before the next timed mock: Next practice test date: Date I last checked the official PSI bulletin:

- Pick one cause for each miss, the one that fits best\.
- Count each part on its own and work on the weaker part first\.
- If the same cause stays on top after a retest, change the drill\.
- This log is for your own study\. Check current exam rules in the official PSI bulletin and fill in the date you checked\.

## Read the log by part

Keep a separate count for each part, and sort the weaker part first\. On NEC Knowledge the work is finding the rule fast, so watch wrong article and out of time\. On Calculations the work is the setup and the math, so watch skipped step, rounding and wrong table column\.

The bulletin says not to consider code exceptions or optional calculation methods unless the question directs you to\. A miss from using one anyway goes under misread question\.

## Sort your misses

### Mistake log by cause

Enter how many misses you had in each cause on one practice test or a set of tests\. The counts shown are an example to replace with your own log\.

- Wrong article
- Wrong table column
- Skipped step
- Rounding
- Misread question
- Out of time

A mistake log works best next to a plan that tells you what to study next\. [Compare ET Member](https://www.tsaielectro.com/membership/?et_src=cr1030-7852) , the paid plan with a step\-by\-step learning path for the Texas journeyman route\.

### How do I review a failed journeyman practice test?

Find the code path that answers each miss and give it one cause\. Then count the causes and drill the biggest one before your next timed mock\.

### What are common mistakes on the journeyman calculations part?

Our workbook flags traps such as derating from the 75 C column instead of 90 C, forgetting 125% on continuous loads, sizing motor conductors from nameplate current and using the full raceway area instead of the 40% area\. Each one fits a cause in the log\.

### Does the real exam tell me what I got wrong?

A failing candidate gets a diagnostic report of strengths and weaknesses right after the exam\. It shows weak areas, so a mistake log from your own practice is still the way to find the cause behind them\.

Previous: [Journeyman Practice Test Score: Are Both Parts Above 70%](https://www.tsaielectro.com/journeyman-exam-practice-test-score/) Next: [Journeyman Exam Calculation Steps: Write a Solution You Can Check](https://www.tsaielectro.com/journeyman-exam-calculation-solution-steps/) See the whole map on the [Texas electrician career tree](https://www.tsaielectro.com/texas-electrician-career-tree/) \.

## Sources checked October 2026

As an Amazon Associate, I earn from qualifying purchases\.

- [PSI Candidate Information Bulletin 1682, TDLR Electrician](https://test-takers.psiexams.com/api/content/bulletin/1682)
- [Texas Journeyman Electrician Exam Prep 2026 NEC \(Tsai Electro workbook\)](https://www.amazon.com/dp/B0HMLXV8G7?tag=tsaielectro0c-20)
