Not selected · English · Dual units
My account Start free test

Compare A Electrical Drafter ↔ B Mechatronics Engineer

Your route

1 move

No pay difference shown for this route: mechatronics Engineer: OEWS pay for an 'All Other' group; not specific to this occupation.

Gates on this route

  • Move 1, to Mechatronics Engineer: bachelor's degree (O*NET: most in Mechatronics Engineer hold one), license depends on the work (Texas PE license (TBPELS) is required for the practice of engineering as defined in Occ. Code 1001.003; whether this job needs it depends on the work).
  1. Move 1 Transfer move to the side

    Electrical Drafter to Mechatronics Engineer

    • O*NET lists Mechatronics Engineers as a related occupation (Supplemental); skills and knowledge profile similarity r = 0.79 (O*NET related occupation beyond the 6 drawn laterals).
    • Gates: bachelor's degree (O*NET: most in Mechatronics Engineer hold one), license depends on the work (Texas PE license (TBPELS) is required for the practice of engineering as defined in Occ. Code 1001.003; whether this job needs it depends on the work).

Side by side

Mechatronics Engineer: 58% work more than 40 hours a week, about 1.6 times the share for Electrical Drafter (36%).

Occupation-wide pay all experience levels, not this level's pay; Texas median, base pay, $0 to $300k

A
B
$80,620no difference shown$115,810

One side's OEWS pay is an 'All Other' group, not this occupation.

Outlook 2024 to 2034 whole occupation

A +0.9% Texas, 220 openings a year

B +11.7% Texas, 690 openings a year

Over 40 h a week

A
B
36%+22 pts58%

Physical load our index from O*NET, 1 to 5; A B; largest differences first

1.5 / 5+0.01.6 / 5

  • Outdoors, all weather-0.75Outdoors, all weather: A 2.11, B 1.36
  • Hazardous equipment+0.73Hazardous equipment: A 1.62, B 2.35
  • Very hot or cold-0.50Very hot or cold: A 1.76, B 1.26
  • Bending or twisting+0.20Bending or twisting: A 1.49, B 1.69
  • Hazardous conditions-0.18Hazardous conditions: A 2, B 1.82

Degree

A Most people in this job do not hold a bachelor's degree (O*NET: 43% do).

B Most people in this job hold a bachelor's degree or higher (O*NET: 67%).

License

A No license for this job title at the 8 Texas and federal licensing agencies read on 2026-10-03 (TDLR, TSBPE, TCEQ, TCFP, TEA, TBPELS, NRC and EPA).

B Texas PE license (TBPELS) is required for the practice of engineering as defined in Occ. Code 1001.003; whether this job needs it depends on the work.

Experience

A Most common related work experience: over 6 months, up to and including 1 year (O*NET: 30%).

B Most common related work experience: over 2 years, up to and including 4 years (O*NET: 29%).

Skills O*NET importance, 1 to 5

You likely have: 6

  • Critical Thinking
  • Writing
  • Active Listening
  • Speaking
  • Active Learning
  • Coordination

To build: 6

  • Operation and Control +1.50
  • Science +1.24
  • Operations Monitoring +0.87
  • Technology Design +0.87
  • Mathematics +0.63
  • Complex Problem Solving +0.50

Make this your goal

Save Electrical Drafter to Mechatronics Engineer as your goal. Each step then shows the hours you have logged toward it, your exam practice and your license, with the one thing to do next and the 6 skills to build as a checklist. Free with an account.

Share your route

One number, the route and its gate go on the card; nothing about you. Your device's dark mode picks the dark card.

My route: Electrical Drafter to Mechatronics Engineer, 1 move (on the Electrical Career Map). Gate: bachelor's degree; license depends on the work.
Feed, 1080 × 1350 · light and dark
My route: Electrical Drafter to Mechatronics Engineer, 1 move (on the Electrical Career Map). Gate: bachelor's degree; license depends on the work.
Link preview, 1200 × 630 · light and dark

★ Resources
Scroll to Top
Not a licensed Professional Engineer in Texas or any U.S. state. Does not offer engineering services. Exam-prep education only.