Skip to main content
Not selected · English · Dual units
My account Join free Start free test
Home Electrical Load Calculation Software

Electrical Load Calculation Software

Load Calc · NEC 220

From load calc to signed upgrade in one visit.

Enter the house. Get the NEC 220 demand, the right service size, a panel schedule and three ready-to-send quote options, plus a permit packet for the office.

Starts at $4.99 for the first month, then $14.99/mo, or $99/yr. Renews automatically; cancel any time. 30-day refunds.

18appliance presets
4NEC methods (220.82, 220.83, 220.87)
$99/yrwith Job Desk
Load Calc · 1428 Elm St
Floor area2,150 sq ft
Range12 kW
Dryer5 kW
Heat pump4 ton
Water heater4.5 kW
EV charger48 A
Existing service150 A
Calculated demand
163 A
Exceeds 150 A service
Recommend 200 A
NEC 220.82 optional method, sample house. Drag the sliders.
Good$2,850Load mgmt
Better$4,200200 A panel
Best$6,900320 A + EV
Permit packetPDF readyLoad summary + panel schedule

What is Load Calc? Web software for electricians that runs NEC 220 residential load calculations (220.82, 220.83 and 220.87), sizes the service, fills the panel schedule and builds a Good/Better/Best upgrade quote with a permit packet. It is included in Tsai Electro Membership ($99/yr) with Job Desk; Kopperfield’s residential plan is $34.99/month.

Load Calc is a calculation aid; the licensed electrician and the local AHJ make the final call. It is not a permit filing service.

How it works

Three steps, one site visit.

Walk the house

Add square footage and appliances from 18 presets or your own, right from your phone.

Get the answer

Demand amps, service size and a panel schedule, with the NEC section shown on every line.

Send the quote

Good / Better / Best options, a homeowner quote and a permit packet, each printed to PDF.

What you get

Built for residential service work.

18

Appliance presets

Ranges, dryers, heat pumps, water heaters and more, plus your own custom appliances.

4

NEC methods

220.82, 220.83(A), 220.83(B) and 220.87 measured demand, with the NEC section shown on every line.

3

Code bases

Texas NEC 2023, Houston NEC 2026 (from Sept 1, 2026) and California CEC 2022, or set your own via Other.

3

Quote tiers

Good, Better and Best service-upgrade options built from the same load calc.

2

Printable PDFs

A permit packet for the office and a homeowner quote for the kitchen table.

200

Saved jobs

Templates, copy last job, your setup and price list. Data follows your account to any device.

Compare

Load Calc vs Kopperfield and free calculators

FeatureLoad CalcKopperfieldFree calculators
Price$99/yr incl. Job Desk$34.99 / $44.99 / $79.99 per moFree
NEC 220 residential calc✓✓✓
Panel schedule✓✓Not listed
One-line diagramsNot yet✓Not listed
Commercial load calcsNot yet✓Not listed
Good / Better / Best upgrade quote✓Not listedNot listed
Estimates, invoices, expiry tracker✓ Job DeskNot listedNot listed
Exam prep and career steps✓Not listedNot listed

Prices from each vendor’s public pricing page (annual billing where offered), checked Nov 17, 2026: Kopperfield. Free calculators compared: Electrical Load Calc NEC, Housecall Pro electrical calculator, Breaker Box. “Not listed” means the vendor’s page does not list it.

FAQ

Questions people ask first

What electrical load calculation software is there?

Kopperfield covers residential and commercial load calcs and one-line diagrams, from $34.99 a month. Load Calc from Tsai Electro covers NEC 220 residential load calcs, panel schedules and Good/Better/Best upgrade quotes for $99 a year, with Job Desk included. Free phone apps handle quick single checks.

Which NEC methods does Load Calc use?

The optional method for dwellings (220.82), the existing-dwelling methods 220.83(A) and 220.83(B), and the measured maximum demand method (220.87). Each line shows the NEC section it comes from.

Which code editions are supported?

Texas NEC 2023, Houston NEC 2026 (effective September 1, 2026) and California CEC 2022. Pick Other to enter your own jurisdiction’s edition and values.

Can I try Load Calc for free?

Yes. Visitors can open a sample job at /member/load-calc/. Membership starts at $4.99 for the first month, with 30-day refunds.

Is my job data saved?

Yes. Up to 200 jobs are saved to your account, with templates, copy last job, your setup and your price list. Switch phones and your data is still there.

Does Load Calc draw one-line diagrams?

Not today. It produces the load summary, panel schedule, permit packet and homeowner quote.

Quote the upgrade before you leave the driveway.

Starts at $4.99 for the first month, then $14.99/mo, or $99/yr. Renews automatically; cancel any time. 30-day refunds.

★ Resources
Scroll to Top
Not a licensed Professional Engineer in Texas or any U.S. state. Does not offer engineering services. Exam-prep education only.