Skip to main content
Not selected · English · Dual units
My account Join free Start free test
Home Article

Journeyman Practice Test Score: Are Both Parts Above 70%

Updated About 12 min read

Short answer: Score each part on its own, never as one total. On a full 59-item Knowledge mock you need 42 correct for 70% and 48 for 80%; on a 26-item Calculations mock you need 19 for 70% and 21 for 80%. A strong Knowledge score cannot cover a weak Calculations score, because the real exam passes each portion at 70% separately. Aim for 80% or better on each part before exam day.

A practice score only helps if it is split by part and by topic. The Practice Pack has 10 full timed two-part mocks, scored at 70% with a score by part and by topic and a line showing which part you would fail. A wrong-answer list, a weak-area check and 299 step-by-step calculation solutions show you what to rework, and retakes are unlimited. US$39, one payment.

Tsai Electro is an independent learning site. Not affiliated with TDLR, PSI or NFPA. Exam rules can change, so confirm in the PSI bulletin linked below.

Free short diagnostic: Knowledge and Calculations

Start here without buying anything or signing in. Answer three Knowledge questions and three Calculations questions on paper, then open the answer notes below. Keep the two scores separate.

Fictional examples for paper study only. These six questions sample lookup, basic theory and arithmetic. They are not official exam questions, a full exam outline, a timed mock or a validated readiness test. No short-test score predicts a pass, grants a license or authorizes field work. Do not build, connect, energize, test or open equipment for this exercise. For a real job, stop and ask your qualified supervisor.

Write your first answer and a short reason before opening an answer note. For calculations, show the formula, substitution and unit. Mark guesses with G. A correct guess earns its answer point but still goes on your review list.

Knowledge: three questions

  1. K1: Lookup: A paper question asks about motor horsepower and motor overload. Which topic should you look up first?

    A. Motors. B. Raceway fill. C. Box fill.

  2. K2: Series concept: A fictional steady series circuit on paper labels current through one resistor as 1 A and through the next as 2 A. Can both labels be correct?

    A. Yes, if the resistances differ. B. No, the series current must be the same. C. Yes, because the voltage divides.

  3. K3: Parallel concept: In an ideal parallel circuit on paper, what is the same across branches connected to the same two points?

    A. Branch current. B. Branch resistance. C. Voltage.

Calculations: three questions

  1. C1: Current and units: An ideal 12-ohm resistor has 24 V across it in a fictional paper circuit. Find current in amperes.

    A. 288 A. B. 2 A. C. 0.5 A.

  2. C2: Resistive power: An ideal resistive load is represented by 24 V and 2 A on paper. Find power in watts.

    A. 48 W. B. 12 W. C. 26 W.

  3. C3: Series setup: Ideal 6-ohm and 18-ohm resistors are in series across 48 V in a fictional paper circuit. Find the current.

    A. 8 A. B. 24 A. C. 2 A.

Check answers and follow the route for each miss

Open these after your first attempt. Use the same route for a guess or a correct answer you cannot explain. Each review link leads to an existing free lesson; use the section name shown.

K1: answer, review and retry

Answer A. The question names a motor. Start with the motor topic, then find the section that matches what is asked. Do not use a rule just because its number is familiar.

Review: Keyword to first article. Read the Motors row, then write topic → article → section/table for one paper question. Check the code edition against the current official bulletin before exam preparation.

Retry with the answer covered: A different paper question asks about cubic inches and a box. Which topic comes first?

Check the retry

Box fill.

K2: answer, review and retry

Answer B. A series circuit has one current path. Current is the same through its parts; resistance values and voltage drops can differ.

Review: Series circuits. Read the Series circuits paragraph and write the two facts: current stays the same; resistances add. Compare these with your answer.

Retry with the answer covered: Two unequal resistors are in series on paper. Must their voltage drops be equal?

Check the retry

No. Their current is the same, but unequal resistances give different voltage drops.

K3: answer, review and retry

Answer C. Those parallel branches share the same voltage. Their currents can differ and add to the total.

Review: Parallel circuits. Read the Parallel circuits paragraph. Write voltage is shared, currents add; then explain why adding branch resistances would be the wrong setup.

Retry with the answer covered: Two parallel branches carry 2 A and 3 A in a fictional paper circuit. What total current is represented?

Check the retry

5 A: add the two branch currents.

C1: answer, review and retry

Answer B. I = E ÷ R = 24 ÷ 12 = 2 A. Write the given values and requested unit before choosing a formula.

Review: The four formulas you use every day. Read the Current row. Write I = E ÷ R, substitute the two values, then check the answer unit is amperes.

Retry with the answer covered: Use 36 V and 12 ohms on paper. What current do you calculate?

Check the retry

3 A: 36 ÷ 12.

C2: answer, review and retry

Answer A. P = E × I = 24 × 2 = 48 W. This is an ideal resistive example, not a method for evaluating a real motor or electronic load.

Review: The four formulas you use every day. Read the Power row and its ideal-resistive-load limit. Write volts × amperes = watts before substituting the values.

Retry with the answer covered: Use an ideal resistive paper load of 24 V and 3 A. What power do you calculate?

Check the retry

72 W: 24 × 3.

C3: answer, review and retry

Answer C. First add series resistance: 6 + 18 = 24 ohms. Then I = 48 ÷ 24 = 2 A. Dividing by only one resistor skips the total-resistance step.

Review: Series circuits. Read the worked series example. Write total resistance on one line and current on the next; compare the first line where your solution differs.

Retry with the answer covered: Use 8 ohms and 16 ohms in series across 72 V on paper. What are total resistance and current?

Check the retry

24 ohms, then 3 A: 8 + 16 = 24; 72 ÷ 24 = 3.

Record two scores, then choose what to review

Give one point for each correct first answer. An unanswered question earns zero; if you stop early, mark the attempt incomplete. On paper write: Knowledge K1 __ K2 __ K3 __ = __ / 3; Calculations C1 __ C2 __ C3 __ = __ / 3. Keep your guess list beside it. Do not combine the two parts.

  • 0 / 3 = 0%
  • 1 / 3 = 33.3%
  • 2 / 3 = 66.7%
  • 3 / 3 = 100%

These percentages describe only these three questions per part. Do not apply the full-mock 70% or 80% lines below to this tiny sample, and do not treat 3 / 3 as exam readiness.

  1. List every missed or guessed question ID and use its review route above. If one part has fewer correct answers, review that part first; if the counts tie, start with a missed or guessed topic in either part.
  2. In the existing mistake log, keep one line per miss or guess: date, question ID, part, topic, your first answer, cause, corrected reasoning or code path, and the next check. Choose the cause that fits: wrong article, wrong table column, skipped step, rounding, misread question or out of time. Do not mark out of time unless you actually used a clock.
  3. Read the named lesson section, cover its answer, then attempt that question’s changed-value or changed-topic retry. Compare your reasoning as well as the answer. If it is still wrong, record the first step you cannot explain and take that question to your instructor; an instructor response is not included here.
  4. Date the retry and keep its result separate from your first score. Once you can explain the sampled ideas, use a full two-part practice test to review wider topics and timing. Keep logging misses; a practice score is not the official exam result.

Your record stays with you: this short worksheet does not collect, submit, save or export your answers. Keep your paper or your own notes. Opening an answer does not record completion, membership progress, supervised hours or an official credential.

Study references: scoring, mistake-log and keyword-lookup lessons dated October 22, 2026; Ohm’s law and series/parallel lesson dated October 11, 2026. Confirm current exam requirements in the official bulletin linked below.

Free timed Calculations set: 10 questions in 42 minutes

After the six-question diagnostic, take this set under a clock. It is free, on paper, with no sign-in.

Why 42 minutes. PSI Candidate Information Bulletin 1682 (updated 9/15/2026) gives the Texas journeyman Calculations portion 26 items in 110 minutes. 110 minutes x 60 = 6,600 seconds, and 6,600 seconds / 26 items = about 254 seconds per item, or 4 minutes 14 seconds. Ten questions at that pace is 10 x 254 = 2,540 seconds, about 42 minutes.

How to take it. Print the set or copy it onto paper. Use only a non-programmable, silent calculator, the kind the bulletin allows. Set a 42-minute timer and start. Aim to move on from any question after about 4 minutes 14 seconds, the same pace as the real Calculations portion. When the timer ends, stop, even mid-question. Then open the answer key and score yourself out of 10.

What it covers. These are original fictional paper questions on electrical theory: Ohm's law, power, series, parallel, combination circuits, three-phase current and voltage drop. Every load is ideal and every value is given in the question, so no code lookup is needed. They are not PSI questions and they are not a full mock. The real Calculations portion also includes load and code-table calculations that need your NEC book.

  1. T1. An ideal resistor of 40 ohms has 120 V across it. Find the current.

    A. 0.33 A. B. 3 A. C. 80 A. D. 4,800 A.

  2. T2. An ideal resistive heater is rated 4,800 W at 240 V. Find the current.

    A. 2 A. B. 10 A. C. 20 A. D. 50 A.

  3. T3. Ideal resistors of 10, 20 and 30 ohms are in series across 120 V. Find the voltage across the 30-ohm resistor.

    A. 20 V. B. 40 V. C. 60 V. D. 120 V.

  4. T4. Ideal resistors of 12 ohms and 6 ohms are in parallel. Find the total resistance.

    A. 4 ohms. B. 6 ohms. C. 9 ohms. D. 18 ohms.

  5. T5. Two ideal branches of 60 ohms and 40 ohms are in parallel across 120 V. Find the total current.

    A. 1.2 A. B. 2 A. C. 3 A. D. 5 A.

  6. T6. A 6-ohm resistor is in series with two 12-ohm resistors that are in parallel with each other. The circuit is across 120 V. Find the total current.

    A. 4 A. B. 5 A. C. 10 A. D. 20 A.

  7. T7. A balanced three-phase resistive load draws 24 kW at 480 V, power factor 1. Find the line current.

    A. 16.7 A. B. 28.9 A. C. 50 A. D. 86.6 A.

  8. T8. A 240 V load draws 20 A. Each of the two circuit conductors has 0.05 ohm of resistance (given for this paper question). Find the voltage drop as a percent of 240 V.

    A. 0.42%. B. 0.83%. C. 1.67%. D. 4.17%.

  9. T9. An ideal resistive heater is rated 1,500 W at 120 V. Find its resistance.

    A. 0.08 ohm. B. 9.6 ohms. C. 12.5 ohms. D. 180 ohms.

  10. T10. An ideal 10-ohm resistor carries 3 A. Find the power it uses.

    A. 13 W. B. 30 W. C. 90 W. D. 300 W.

Answer key with the working
  1. T1: B. I = E / R = 120 / 40 = 3 A. NEC section: none, this is a theory question.
  2. T2: C. I = P / E = 4,800 / 240 = 20 A. NEC section: none, this is a theory question.
  3. T3: C. Total R = 10 + 20 + 30 = 60 ohms. I = 120 / 60 = 2 A. Drop on 30 ohms = 2 x 30 = 60 V. NEC section: none, this is a theory question.
  4. T4: A. R = (12 x 6) / (12 + 6) = 72 / 18 = 4 ohms. The total is always less than the smallest branch. NEC section: none, this is a theory question.
  5. T5: D. Branch currents: 120 / 60 = 2 A and 120 / 40 = 3 A. Total = 2 + 3 = 5 A. NEC section: none, this is a theory question.
  6. T6: C. Parallel pair: 12 / 2 = 6 ohms. Total R = 6 + 6 = 12 ohms. I = 120 / 12 = 10 A. NEC section: none, this is a theory question.
  7. T7: B. I = P / (1.732 x E) = 24,000 / (1.732 x 480) = 24,000 / 831.4 = 28.9 A. NEC section: none, this is a theory question.
  8. T8: B. Loop resistance = 2 x 0.05 = 0.1 ohm. Drop = 20 x 0.1 = 2 V. Percent = 2 / 240 x 100 = 0.83%. NEC section: none. The conductor resistance is given in the question, so no code table is used. On the real exam, look up conductor values in your own NEC book.
  9. T9: B. R = E x E / P = 14,400 / 1,500 = 9.6 ohms. NEC section: none, this is a theory question.
  10. T10: C. P = I x I x R = 3 x 3 x 10 = 90 W. NEC section: none, this is a theory question.

Reading your score. 7 of 10 matches the 70% the bulletin sets for each portion. Treat any miss as a topic to review, and treat finishing late as a pace problem even when the answers are right. A short set does not predict a pass. For full two-part timed mocks scored by part and topic, see the Practice Pack further down this page.

Formulas: I = E / R, P = E x I, P = I x I x R, series resistance adds, parallel voltage is shared and branch currents add, three-phase I = P / (1.732 x E) at power factor 1. Review them in Ohm's law, power, series and parallel.

Next step: the full two-part mock. This set is one slice of the Calculations portion. The full timed two-part mocks, scored at 70% by part and by topic, are in the paid Practice Pack: open the Practice Pack page. ET Member keeps your mock scores and weak topics as saved steps on the Texas journeyman route: see what ET Member includes.

Correct answers you need on a full mock

The counts below are our arithmetic on a full-length mock that scores all 59 and all 26 items, rounded up to the next whole question.

PartItems70% needs80% needs
NEC Knowledge5942 correct48 correct
Calculations2619 correct21 correct

On the real exam, 3 Knowledge items and 2 Calculations items are not scored, and you are not told which ones. Scoring every item on a practice test is the simple, honest way to read your result.

The 80% line is the target from our workbook’s four-week plan. It leaves room for a bad day, a slow lookup or a few items in topics you did not drill.

Why the parts must be read apart

The FY2025 TDLR numbers show both parts stop people. 24.46% of Journeyman NEC attempts passed and 20.56% of Journeyman Calculations attempts passed. These figures count attempts, including retakes, not people, but they make one point clear: neither part is the easy one.

Here is an example of why a combined score lies. Say you get 50 of 59 on Knowledge and 15 of 26 on Calculations. That is 65 of 85, about 76% overall, and it looks like a pass. Split by part, Knowledge is about 85% and Calculations is about 58%. On the real exam that is a fail on Calculations, and the retake fee if you fail one or both portions is $78.

What to do with each result

Your resultNext step
Both parts at 80% or higherKeep timed mocks going so the pace holds. Book with confidence.
Both parts between 70% and 80%You are on the line. Rework every miss and take another timed mock.
One part under 70%Spend most of your study time on that part until it clears 80%.
Both parts under 70%Go back to lessons: work Knowledge with the book open, then Calculations by hand.

After each mock, log every miss by cause (wrong article, wrong table column, skipped step, rounding, misread question, out of time). The next page in this section shows how. If you want the topic weights behind your misses, the exam topics and weak areas page lays out the 2026 outline.

Score your practice test

Practice test score by part

Enter how many you got right on each part of a full-length mock. The item counts default to the full exam, 59 and 26. The 45 and 17 correct are an example to replace with your own score.

  • NEC Knowledge correct
  • NEC Knowledge items on your test
  • Calculations correct
  • Calculations items on your test

Use your practice score to choose what to study next. Compare ET Member, the paid plan with a step-by-step learning path for the Texas journeyman route.

Disclosure: If you buy through the Amazon link below, Tsai Electro may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Texas Journeyman Electrician Exam Prep 2026 NEC (paperback)

Our own workbook has 2 full two-part mock exams, 59 and 26 questions, so you can score each part on its own with this calculator. Every answer gives a code path and calculation answers show each step, which makes reworking a low part faster.

What score do you need to pass the Texas journeyman exam?

You need 70% on each of the two portions, NEC Knowledge and Calculations. They are scored separately, so passing one does not make up for the other.

What should my practice test score be before I take the exam?

Our workbook’s plan aims for 80% or better on each portion before exam day. On a full mock that is 48 of 59 on Knowledge and 21 of 26 on Calculations.

What happens if I pass one part and fail the other?

The retake fee if you fail one or both portions is $78. Your score shows right after the exam, and a failing candidate gets a diagnostic report of strengths and weaknesses that tells you where to aim your study.

Sources checked October 2026

Your next Journeyman study step

Start your 7-day free trial

Starts with a 7-day free trial. Your first payment of US$14.99 is on day 8, then US$14.99 every month until you cancel. Cancel anytime. If you cancel during the 7-day free trial, you are not charged and access ends when the trial ends. After the trial, you keep access until the end of the month you already paid for. If a payment is refunded, access to that month ends when the refund is made.

Texas Journeyman Electrician Exam Practice Pack (PSI, NEC 2026)
US$39.00
★ Resources
Scroll to Top
Not a licensed Professional Engineer in Texas or any U.S. state. Does not offer engineering services. Exam-prep education only.