Month: October 2026

Texas Journeyman 7,000 vs 8,000 Hours: When You Can Test and When You Get Licensed

Texas journeyman 7,000 vs 8,000 hours: apply and test once 7,000 hours are approved, but the license comes only after 8,000 hours and a passed exam.

Updated 2026-10-23 · Read the article ›

Journeyman Exam Study Schedule When You Work Full Time in Texas

A journeyman exam study schedule for full-time workers in Texas: set your date inside the one-year window, then split weekly hours across both exam parts.

Updated 2026-10-17 · Read the article ›

Work Boots and Work Clothes for Texas Electrical Apprentices: Fit, Site Rules and Heat

Ask your site what boots and clothes it requires, pick a fit that works and dress for Texas heat. Free fit checklist and boots and work clothes to compare.

Updated 2026-10-23 · Read the article ›

How to Use Hand Tools and Power Tools Safely as a New Electrical Apprentice

Check every tool before use, pick the right tool for the task and learn each power tool on site. Free pre-use checklist and the starter tools apprentices carry.

Updated 2026-10-23 · Read the article ›

Gloves, Safety Glasses and Hard Hats for Electrical Apprentices: Fit, Task and Who Pays

OSHA requires employers to pay for most PPE. See who pays for each item, how to get a good fit and what optional gear to compare if your employer approves.

Updated 2026-10-22 · Read the article ›

Test Equipment for Electrical Apprentices: What Each Meter Does, Its Limits and the Training You Need

What a voltage tester, multimeter and clamp meter each tell you, where each one can mislead you, and why only trained, qualified persons should test at work.

Updated 2026-10-21 · Read the article ›

Electrical Material Takeoff from Drawings: Counting What Your Task Needs

Count devices and boxes, measure conduit and wire runs from the drawings, add your crew's allowances and have your journeyman check it. Free takeoff calculator.

Updated 2026-10-22 · Read the article ›

Electrical Drawing Symbols for Lighting, Receptacles and Controls: How to Read Them

Most electrical drawing sets include a legend for their symbols. Learn where to look first, use the free sheet check and compare printreading books.

Updated 2026-10-22 · Read the article ›

Ladder Safety for Electrical Apprentices: Nonconductive Ladders, Setup and When to Use Something Else

Use nonconductive side rails where energized contact is possible, set the right angle and never stand on the top step. Free setup check and angle tool.

Updated 2026-10-22 · Read the article ›

Electrical Hazards for New Electrical Workers: What Your Task Could Expose You To

OSHA lists the most frequent causes of electrical injuries. Check today's task against them, then ask before you start. Free hazard check and OSHA 10 providers.

Updated 2026-10-22 · Read the article ›