Skip to main content
Not selected · English · Dual units
My account Join free Start free test
Home First-Week Checklist for a New Texas Electrical Apprentice

First-Week Checklist for a New Texas Electrical Apprentice

A new Texas electrical apprentice should confirm licensing status, supervision arrangements, pay terms and how hours will be recorded. Learn jobsite safety rules and ask what tasks you may do. Keep a personal log from day one. Verify requirements with TDLR and your employer.

Short answer: Before day one, hold a Texas apprentice electrician license and save the number. Bring your ID and work papers, ask what safety gear the company provides, and buy only the starter tools on your employer’s list. From day one, write down every day’s hours with the name and license number of the Master Electrician you worked under.

Part of Texas Electrician Exams: every Texas license step and exam in one place.

On this page

Those notes become the hours on your Journeyman application. Free to read and print: tick the boxes on paper as you go.

Before day one

  • Apprentice license. Apply online at TDLR. There is no experience or exam requirement, and the fee is $20. If you apply online and report no criminal convictions, TDLR issues a temporary license automatically (TDLR).
  • If you have a conviction, send TDLR’s Criminal History Questionnaire with your application. TDLR says the review can take one to six weeks, so apply early (TDLR).
  • Save your license number in your phone and on your resume. Full steps: Texas electrician apprentice license.
  • Work papers. Photo ID and proof you can work in the U.S. (for example a Social Security card or birth certificate). Programs also ask for diplomas or transcripts, and veterans should bring a DD-214 (IEC Fort Worth).
  • Ride. Programs list reliable transportation as a requirement, and North Texas Electrical JATC says you may be sent to work anywhere in its 22 counties (North Texas FAQ).

Safety gear

  • Ask your supervisor what the company provides and what you must bring.
  • Common basics on construction sites: hard hat, safety glasses, work gloves, hearing protection, a high-visibility vest and sturdy work boots. Buy what your employer requires.
  • Work on anything energized only when your supervisor shows you how, with the right gear.

Starter tools

  • Get the list first. IEC Fort Worth says contractors usually give a recommended starter tool list and apprentices build their tools over time (IEC Fort Worth).
  • Expect to bring your own hand tools. IEC Greater San Antonio and IEC of East Texas both say applicants furnish their own tools (IEC Greater San Antonio, IEC of East Texas).
  • For a sample first-year list and costs, see the tools section of first-year costs.

Your hours log, from day one

To apply for a Journeyman license, you need at least 7,000 hours of on-the-job training under the supervision of a Master Electrician licensed in Texas to sit the exam, and 8,000 hours for the license. Each supervising Master signs a separate Experience Verification Form (ELC017) (TDLR Journeyman application).

The form asks for the supervisor’s name, phone, company, license type and number, the dates supervised, the number of hours and the type of work. Log the same things now so the form is easy later (Form ELC017).

DateCompanySupervising MasterMaster license numberHoursType of workWhat you did
  • Fill it in every day, not at the end of the month.
  • Keep copies of pay stubs. They back up your hours.
  • More detail on signatures and changing employers: the ELC017 form guide.

Your first five days

  1. Day 1: Arrive 15 minutes early. Learn your supervisor’s name and the Master Electrician’s name. Start the hours log.
  2. Day 2: Ask where tools and materials are kept and how the company wants them returned.
  3. Day 3: Ask which safety rules matter most on this jobsite.
  4. Day 4: Write down three new words or parts and look them up at night.
  5. Day 5: Ask your supervisor one question: "What should I do better next week?"

Mark your renewal date

Your apprentice license lasts one year. To renew, you need 4 hours of continuing education, or you can be enrolled in a TDLR-registered apprenticeship training course instead. Renewal is $20 online (TDLR renewal).

Track this skill in your skill tree

Save this skill to your skill tree with a free account.

Free to start. Keep your progress in your account.

Create your free account

Next step on the Texas ladder

Five questions to confirm before your first shift

Use this short message as a starting point for a real conversation with the employer or program. It is a preparation checklist, not an instruction to perform electrical work.

  • Where should I report, at what time, and whom should I ask for when I arrive?
  • Which identification or onboarding documents should I bring, and how should I provide them securely?
  • What tools and protective equipment does the company provide, and what exactly should I bring myself?
  • Who supervises my work, and what should I do if I do not understand a task or believe a situation is unsafe?
  • How are hours recorded, who checks them, and whom should I contact if a record is wrong?

Write down the answers and the date you confirmed them. If a tool list or reporting location changes, update that one item instead of relying on a screenshot from an earlier conversation. Keep personal documents with the intended employer; you do not need to post them in a public comment to use this guide.

After the first week, choose one question to study and revisit it with your supervisor. The goal is a repeatable learning habit, not collecting equipment before you know what the job requires.

Related reading: Plan your first-month learning · Start an experience record.

Ready to choose a learning routine after the first week?

Confirm the practical details with your employer before buying equipment or arriving on site. Paid member plans are a separate choice for your learning routine.

Check the paid plans for current inclusions. Membership is not a required hiring cost and does not replace workplace safety instruction.

FAQ

What should I confirm before my first apprentice shift?

Confirm the start time, meeting place, required clothing, contact person and tool list with the organization that is expecting you. Write down the answers rather than relying on a generic first-day list. The First-Year kit includes a pre-start checklist and questions for an employer.

Source: Product contents

A study routine to try

  1. Put the confirmed time, place and contact in your own notes.
  2. Check what to bring and what will be supplied.
  3. Keep unresolved questions visible so you can confirm them before arriving.

Sources

What do I need before my first day as an electrical apprentice in Texas?

A TDLR apprentice electrician license, photo ID and proof you can work in the U.S., reliable transportation, the safety gear your employer requires and the starter tools on its list.

Can I start work while my Texas apprentice license is pending?

No. TDLR says anyone doing electrical work must be licensed first, with no grace period. If you apply online and report no criminal convictions, TDLR issues a temporary license automatically.

How should I log my apprentice hours?

Every day: the date, hours, company, supervising Master Electrician’s name and license number, type of work and what you did. Those are the details TDLR’s Experience Verification Form asks for.

Do I have to buy my own tools as a Texas apprentice?

Usually your own hand tools. IEC Greater San Antonio and IEC of East Texas say applicants furnish their own tools, and IEC Fort Worth says contractors usually give a starter list.

When do I renew my Texas apprentice license?

Every year. Renewal is $20 online and needs 4 hours of continuing education, or enrollment in a TDLR-registered apprenticeship training course.

Does this give the start date for my program?

Your employer or program confirms that date. This checklist helps you record the answer.

Is this a task instruction for electrical work?

It is an arrival and preparation checklist. Follow your employer’s training and assigned supervision at work.

Sources

About Tsai Electro

Tsai, creator of Tsai Electro, holds Taiwan’s national Class B Indoor Wiring Technician certificate. He worked on site on the MEP side of a smart temperature-controlled logistics center at Taipei Port, on the second-phase campus of Jiufenzi Junior and Elementary School in Tainan, and on the Liugui Administrative Center in Kaohsiung. The Liugui project was honored at the 25th Public Construction Golden Quality Awards. He teaches career switchers on YouTube @tsai.electro.

He writes these Texas guides from the official TDLR pages and the PSI candidate bulletin, cites NEC articles by number only, and dates every source. Found an error? Tell us and we will correct it.

Your next steps

  1. Find this step in the Texas career tree
  2. Compare ET Member plans
  3. See the practice or planning pack for this stage
★ Resources
Scroll to Top
Not a licensed Professional Engineer in Texas or any U.S. state. Does not offer engineering services. Exam-prep education only.